
A puddle by the heater isn’t always the tank. Work through this list in order, and skip to the warning box if anything looks dangerous.
1
Find where the water is coming from
Dry the floor and the tank, then watch for a few minutes. Water from above usually means a fitting or pipe; water from underneath often means the tank itself.
2
Check the pipe connections on top
Look at the cold inlet and the hot outlet. A slow drip at a fitting can often be stopped by snugging it a quarter turn with a wrench.
3
Look at the relief valve and its pipe
The relief valve lets water out if pressure or temperature runs too high. A little water from its discharge pipe means it’s working; a steady stream means call us.
4
Check the drain valve at the bottom
The valve near the base can drip if it isn’t fully closed or its washer has worn. Make sure it’s closed hand-tight, and put a bucket under it.
5
Rule out condensation
On a cold morning a newer heater can sweat, and the drips land right where a leak would. If they stop once the water is hot, it’s normal.
6
Check the tank’s age
The label shows the manufacture date. A tank over 10 years old that’s leaking from the body is near the end of its life, and it can’t be patched.
Shut it off and call right away if…
Water is coming from the tank itself. Close the cold supply valve above the heater, then turn off its power or set the gas control to Off.
You smell gas. Leave the house and call your gas company from outside.
The relief valve is spraying hot water, or the tank is rumbling and hissing.
Water is spreading toward outlets, cords or anything plugged in.
A leaking tank can’t be repaired, but most replacements are done the same day.
Still leaking?
A plumber can be there today.
Same-day service on most calls. 24/7 for emergencies.
Protection Plan
A yearly checkup catches this early.
From $15 a month
24/7
Open 24/7
Help is
one call away.
Same-day service across Your City, priced before any work starts.
